Hall sensor H01

Brief characteristics of sensor

Revolution sensor H01 serves to sensing position of crank-shaft of gas-engine. While exciting of two coil allows splitting of sparks on the basis of shading or shielding sensor status.

Physical principle of sensor is bar compound of Hall sensor and magnet. Then magnetic field is interrupted by ferromagnetic metal rotating disc.

Sensor is intended for ignition of type Universal Ignition and Direct Ignition.

Basic technical parameters

Parameter	Range
Supply voltage	4,5 – 30V
Amperage take-off	9mA
Working revolutions	0 to 25.000 rev/min
Working temperature	-40 to 150°C
Type of switching	Open commutator (NPN)
Maximum switched amperage	40mA
Maximum switched tension	40V
Tension drop in switched status	0,4V while 20mA
Outer proportions	32x16,5 mm